| Model |
EGX-350 |
Table size
|
305 (W) x 230 (D) mm
[12 (W) x 9.1 (D) in.] |
XYZ-axis
travels
|
305 (X) x 230 (Y) x 40
(Z) mm [12 (X) x 9.1 (Y) x 1.6 (Z)
in.] |
XYZ-axis drive
system
|
Stepping motor, 3-axis
simultaneous control |
|
Operating speed |
X and Y axes: 0.1 to
60 mm/sec. (0.004 to 2.4 in./sec),
Z axis:
0.1 to 30 mm/sec. (0.004 to 1.2
in./sec) |
Software
resolution
|
0.01 mm/step or 0.025
mm/step (0.0004 in./step or 0.001
in./step) |
Mechanical
resolution
|
X and Y axes: 0.0025
mm/step (0.0001 in./step),
Z axis: 0.00125
mm/step (0.0005 in./step) |
Spindle motor
|
Brushless DC motor,
maximum 50 W |
Spindle speed
|
5,000 to 20,000
rpm |
Tool chuck
|
Cutter holder, collet
method |
Loadable workpiece
thickness
|
Maximum 40 mm (1.6
in.) or 38 mm (1.5 in.) when nose unit is
used |
|
Connectivity |
USB (compliant with
Universal Serial Bus Specification Revision 1.1)
or serial (RS-232C-compliant) |
| Control command
set |
RML-1 |
Power
requirements
|
AC 100 to 120 V ±10%,
1.3 A, 50/60 Hz (overvoltage category II, IEC
60664-1); or AC 220 to 240 V ±10%, 0.6 A, 50/60
Hz (overvoltage category II, IEC
60664-1) |
Power
consumption
|
122 W |
| Acoustic noise
level |
During operation: 60
dB (A) or less (when not cutting), During
standby: 40 dB(A) or less (as specified by ISO
7779) |
| Dimensions |
393 (W) x 616 (D) x
591 (H) mm [15.5 (W) x 24.3 (D) x 23.3 (H)
in.] |
Weight
|
34 kg (75
lb.) |
| Environmental |
Temperature: 5 to 40°C
(41 to 104°F),
Humidity: 35 to 80 % (no
condensation)
Ambient pollution degree: 3 (as
specified by IEC 60664-1) |
| Accessories |
Power cord, depth
regulator nose (nose unit), nose-unit retainer
(retaining screw, spring), spare mounting screw
(for the cutter holder), character cutter
(diameter 3.175 mm), flat cutter (diameter 3.175
mm), wrench, solid collet (diameter 3.175 mm),
solid collet (diameter 4.36 mm), hexagonal
wrench, hexagonal screwdriver, handy panel,
adhesive sheet, vacuum adapter for chip
cleaning, Roland Software CD-ROM, Roland
EngraveStudio™ CD-ROM, Roland Software Program
Guide, Roland EngraveStudio™ Program Guide, and
User's Manual |
