EGX-30 Specifications
The following accessories are available through Custom Engraving Company. To purchase
any of the following items, please call (888) 605-2572, or (321) 676-9885 or email.

MODEL EGX-30
TABLE SIZE 12 in. x 8-1/16 in. (305 mm (X) x 205 mm (Y))
MAX. OPERATION AREA 12 in. x 8-1/16 in. (305 mm (X) x 205 mm (Y) )
FEED RATE 118-1/16 in. (X, Y-axis: Max. 3.0 m)/min. (1-15/16 in. (50 mm)/sec.)
MECHANICAL RESOLUTION 0.000394 in. (0.01 mm)/step 0.0000492 in.(0.00125 mm)/step ( micro-step control )
SOFTWARE RESOLUTION 0.000394 in. (0.01 mm)/step
DISTANCE ACCURACY Whichever the greater value of 0.00394 in. (0.1 mm) or 0.5% of moving distance
RIGHT-ANGLE ACCURACY 12-1/16 in.( 0.0394 in.) (1 mm (305 mm))
SPINDLE MOTOR 15 W ( DC motor )
REVOLUTION SPEED 5,000 --- 10,000 rpm
ENGRAVING TOOL MOUNTING DIAMETER 3.175 mm (1/8 in.)
INTERFACE Parallel (in compliance with the specification of Centronics)
Serial (under RS-232C standard) Automatic switching
INSTRUCTION SYSTEM CAMM-GL II mode2
POWER CONSUMPTION 0.6 A / 117 V 0.4 A / 220 to 230 V 0.4 A / 230 to 240 V
ACOUSTIC NOISE LEVEL Operation mode: 70 dB (A) or less Standby mode: 40 dB (A) or less
(According to ISO 7779)
EXTERNAL DIMENSIONS 20-1/4 in.(W) x 19-3/8 in.(D) x 8-9/16 in. (H)(513 mm (W) x 491 mm (D) x 217 mm (H)

WEIGHT 15.5 kg (34.2 lb.)
OPERATION TEMPERATURE 5 to 40 C (41 to 104 F)
OPERATION HUMIDITY 35 to 75% ( no condensation )
ACCESSORIES Power cord: 1, Dust collector hose and duct: 1, Engraving cutter: 1, Engraving-tool holder: 1, Diamond cutter adapter: 1,
Hexagonal screw driver: 1, Spanner: 1, Hexagonal wrench: 1, Test material: 1, Adhesive sheet for securing material: 1,
Roland Software package CD-ROM: 1, User's manual: 1

Home Page || Table of Contents || Send E-Mail

Email: machines@autoplates.com

or call 1-888-458-4760 or (321) 676-9885