Roland STIKA Specifications MODELS SX-8, SX-12, SX-15
The following accessories are available through Custom Engraving Company. To purchase
any of the following items, please call (888) 458-4760, or (321) 676-9885
or email.
STIKA Specifications
MODEL SX-8 SX-12 SX-15
MAX. CUTTING AREA
SX-8 - 6-1/4" x 39-5/16" (160mm x 1000mm)
SX-12 - 9-13/16"x 39-5/16" (250mm x1000mm)
SX-15 - 13-3/8" x 39-5/16" (340mm x 1000mm)
ACCEPTABLE MEDIA WIDTHS
SX-8 - Width: 7-13/16 to 8-7/16” (200 to 215mm) Length: 43-1/4" (1100 mm)
SX-12 - Width: 11" to 12" (280 to 305mm) Length: 43-1/4" (1100 mm)
SX-15 - Width: 14-1/8" to 15" (360 to 381 mm) Length 43-1/4" (1100 mm)
CUTTING SPEED
SX-8 - 7/16 to 1-9/16"/sec (12 to 40 mm/sec.)
SX-12 - 7/16 to 1-9/16"/sec (12 to 40 mm/sec.)
SX-15 - 7/16 to 3-7/8"/sec (12 to 100 mm/sec.)
ACCEPTABLE MATERIAL
PVC sheet (0.00394" (0.1 mm) or less in thickness, 0.0118" (0.3mm)
or less in thickness including the backing paper)
INTERFACE Parallel (IEEE 1284 Nibble mode)
POWER CONSUMPTION AC adapter DC + 19 V 2.1A
ACOUSTIC NOISE LEVEL Cutting mode: under 60 dB (A) (According to ISO 7779)
OPERATION TEMPERATURE 41 to 104ºF (5 to 40ºC)
OPERATION HUMIDITY 35 to 80 % (no condensation)
ACCESSORIES Roland CutChoice CD-ROM:1,CutChoice User's Manual:1
Application tape for test cuts :1,Blade protect :1,Roland Software Package CD-ROM:1,SX-15/12/8 User's Manual :1
AC adapter :1,Power cord :1,Ferrite cores :2,Cable ties (For securing ferrite cores):2,Blade holder/Blade :1,Material
for test cuts :1
[ Roland Engraving Machines ] [ Roland Stika Machines
] [ Table of Contents ] [ Home ]